Your customer has a FlexPod solution with a 2-node switchless ONTAP system, Cisco Nexus 93108 switches, and Cisco UCS B-Series servers. The customer wants to expand to a 4-node ONTAP storage cluster.

Which configuration is valid for expansion?

A. Use the existing Nexus 93108 switches for the cluster interconnect.

B. Add two Nexus 3232C switches for the cluster interconnect.

C. Add two Nexus 93108 switches for the cluster interconnect.

D. Add one Nexus 3232C switch for the cluster interconnect.

You are configuring high availability within the network layer of your FlexPod configuration.

In this scenario, what are two Cisco best practices for designing vPC on your Cisco 9000 Series switches? (Choose two.)

A. Peer keep-alive connectivity between the switches should be established.

B. A minimum of four 10GB Ethernet connections are required for vPC.

C. The vPC auto-recovery feature should be enabled.

D. Port channels should be configured for LACP passive mode.

Your customer wants assurances that all aspects of FlexPod are highly available.

Which statement is correct in this scenario?

A. Cisco UCS Manager contains multiple UCS domains.

B. Cisco UCS Manager automatically copies its configuration data to a remote data store.

C. Cisco UCS Manager uses active-active architecture.

D. Cisco UCS Manager maintains a replica of configuration information.

A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.

In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?

A. three

B. one

C. four

D. two

A customer wants to extend a Layer 2 network over a Layer 3 Nexus 9000 infrastructure. Which Layer 2 overlay scheme accomplishes this task?

A. STP

B. vPC

C. VXLAN

D. EIGRP

Which command would a FlexPod administrator use to determine whether an FC initiator has logged on to the fabric?

A. MDS9148>show fcfwd

B. MDS9148>show fcdomain

C. MDS9148>show fcc

D. MDS9148>show flogi database

A customer has verified physical connectivity on the FlexPod. However, the LUNs are not available on the Cisco UCS server. To make the LUNs visible to the UCS, the customer must enable a switching feature for zoning.

In this scenario, what should the customer do?

A. Enable NPIV on all switches.

B. Enable Spine mode on all the Cisco Nexus 9000 switches.

C. Enable NPV on all switches.

D. Enable the device connector feature in Cisco UCS Manager.

When FCoE is configured in a FlexPod environment, which step is required?

A. Assign a VLAN to the FC Uplink port on the Cisco Fabric Interconnects.

B. Create a VSAN within service profiles.

C. Create a VSAN to support FCoE for the FC uplink.

D. Assign a VSAN to the server uplink port on the Cisco Fabric Interconnects.

Which port type would you configure when you connect a chassis to the Cisco Fabric Interconnects?

A. Ethernet uplink ports

B. FC storage ports

C. server ports

D. appliance ports

A customer with a FlexPod Express configuration is currently operating Linux servers. The company wants to move to a Windows-centralized access method for the NetApp storage component.

In this scenario, which two ONTAP features must be configured? (Choose two.)

A. Active Directory security model

B. SVM with the SMB protocol enabled

C. Workgroup security model

D. SVM with the NFS protocol enabled