If you need to make sure that one computer in your Hot-Spot network can access the Internet without Hot-Spot authentication, which menu allows you to do this?

A. Users

B. IP bindings

C. Walled-garden

D. Walled-garden IP

Is action=masquerade allowed in chain=dstnat?

A. yes, but only if dst-addr is specified

B. yes

C. yes, but it works only for incoming connections

D. no

It is required to make a web server on a private LAN visible on the Public Internet. Only the web server port should be visible to the public. Which of the following configuration steps must be met. (select all that apply)

A. Public IP address of the webserver must be installed on the NAT Router

B. in ip firewall NAT there should be a dst-nat between the public ip of the router and the private ip of the webserver

C. Connection Tracking must be enabled on NAT router

D. A route between the NAT Router and the webserver must exist

E. LAN address of the webserver should be routable on the internet

MAC layer by OSI model is also known as

A. Layer 2

B. Layer 1

C. Layer 6

D. Layer 7

E. Layer 3

You have 10 users plugged into a hub running 10Mbps half-duplex. There is a server connected to the switch running 10Mbps half-duplex as well. How much bandwidth does each host have to the server?

A. 100 kbps

B. 1 Mbps

C. 2 Mbps

D. 10 Mbps

In RouterOS queue configurations the word "total" ussually represents

A. download

B. upload + download

C. download - upload

D. upload

Which of the following keystrokes enables safe mode in console:

A. Ctrl+x

B. Ctrl+c

C. Ctrl+d

D. Ctrl+s

How many usable IP addresses are there in a 20-bit subnet?

A. 2047

B. 4096

C. 2048

D. 2046

E. 4094

Router A and B are both running as PPPoE servers on different broadcast domains of your network. It is possible to set Router A to use "/ppp secret" accounts from Router B to authenticate PPPoE customers.

A. true

B. false

Mark all correct answers.

A. /ip firewall filter allows to deny authentication to AP

B. Wireless access-list could allow and deny connect to your AP

C. Default-Forwarding could be enabled for a specific clients by wireless access-list

D. The only way to prevent wireless clients connections - disable wireless interface