DRAG DROP

Match the speed and protocol with the appropriate component.

Select and Place:

DRAG DROP

A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:

1.

3 servers with: quad processors, 256 GB RAM, and 10Gb dual-port NICs 10 TB of high performance shared storage

2.

cloud-based performance monitoring and analytics

3.

The customer prefers rack mounted equipment.

Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

Select and Place:

DRAG DROP Given the solution shown in the exhibit, which adapter is required in the server to facilitate connective in Block 1

Select and Place:

A customer's environment includes virtual machines and containers. They need an on-premises platform that allows them to easily and efficiently deploy cloud-native applications at rack-scale.

Which HPE solution meets the customer requirements?

A. MPE ProLiant for Microsoft Azure Stack

B. HPE Synergy with VMware vSAN

C. HPE Nimble iSCSI

D. HPE Apollo Server

A client needs a data center network for a highly-virtualized server environment. They have the following requirements:

1.

25 Gb connectivity from the servers to the top-of-rack switches

2.

support for iSCSl storage

3.

lowest possible latency between their VM farms, which are contained In separate cabinets and connected to different top-of-rack switches within the data center

4.

support for Python script interpretation and open APIs Which networking product line and architecture should you recommend?

A. ArubaOS-Swrtch configured in a spine/leaf architecture with 5406R switches at the spine and 2930M leaf switches

B. ArubaOS-CX configured in a spine/leaf architecture with 8325 switches at the spine and 8320 leaf switches utilizing VSX between cabinets

C. ArubaOS-CX configured in spine/leaf architecture with 8325 switches at the spine and leaf

D. HPE FlexFabicc configured in a traditional two-tier architecture with 5950 switches at the core and 5940 access switches configured using IRF stacks per cabinet

A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of-rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.

The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum.

Which architecture meets the customer requirements?

A. One VSX stack of four Aruba 8320 48-port 1/10GBASE-T switches

B. Two IRF stacks of two HPE 5710 48-port 1/10GBASE-T switches

C. One IRF stack of four HPE 5710 48-port 1/10GBASE-T switches

D. Two VSX stacks of two Aruba 8320 48-port 1/10GBASE-T switches

You are troubleshooting HPE ProLiant servers for a customer. The customer has granted you read-only access to HPE OneView. You need to download the audit log from OneView.

Which permission level should the customer give you?

A. Network administrator

B. Infrastructure administrator

C. Backup administrator

D. Server administrator

A customer has an application that consumes 500 GB storage and requires an RTO and PRO of 15 minutes.

Which backup and recovery technology enables the customer to meet their requirements in the most cost-effective manner?

A. offsite tape backup

B. remote storage replication

C. log shipping

D. disk-to-disk appliance

A customer has a single ProLiant DL560 Gen 10 running a virtualization system. They want to validate installed firmware components at the hardware level. Which built-in management tool should they use to complete this task?

A. HPE OneView Advanced

B. ILO 5 Advanced

C. UEFI

D. HPE intelligent Provisioning

When installing servers in a rack, a customer has left gaps between the servers.

What should you tell this customer regarding the space between servers? (Select two.)

A. It should be filled with blanking panels.

B. It does not provide correct rack airflow.

C. It provides easy access for servicing components.

D. It allows for easier cable management.

E. It allows for side-to-side component cooling.