A customer run several HPE 3PAR storeserv system in their environment using data rest encryption .The customer needs to add an HPE 3PAR Storeserv 8000system to the storage pool and an external key manager for all systems.. What is the requirement for this solution?

A. Boot server for the existing 3PAR storeserv array must be replaced with self-encrypting drive

B. All drives of the new HPE 3PAR storeserv array must be self-encrypting

C. HPE ESKM FIPS mode must be disabled by the administrator

D. Data on the existing HPE 3PAR storeserv array must be decrypted and re-encrypted with new keys

An existing Nimble customer is interested in adding storage to their environment to store his Backups, but has a constrained budget and limited personal .The solution must scale to allow for substantial growth over the next five years?

A. Nimble SF series

B. Nimble AF series

C. Nimble cloud volume

D. Nimble CS series

A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh.

Which switch feature will ensure that the latencies in the backend are at the lowest possible level?

A. LACP

B. NPIV

C. FSPF

D. VSF

A customer is planning to connect a new HPE 3PAR StoreServ system to its existing Synergy based composable infrastructure via direct-attach. Which tool would be used to manage the storage?

A. HPE SAN Network Advisor

B. HPE Synergy Image Streamer

C. HPE Synergy Composer

D. HPE InfoSight for 3PAR

A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD's configured with RAID5 7+1.

They plan to add four more 3.84 TB SSD's.

What needs to be changed on the configuration once the new SSD's are installed?

A. Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.

B. Change the availability level from cage to magazine.

C. Adjust the cpg growth value to match amount of SSD's.

D. Change the cpg setsize to RAID5 5+1 and run tunesys.

Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?

A. NinjaProtected

B. NinjaStars

C. NinjaCrawler

D. StoreVista

A customer has a large deployment of HPE Synergy compute modules, HPE 3PAR StoreServ storage, and HPE StoreOnce systems in a single data center. They are concerned about the risk of data loss due to site disaster. What is the reason to propose HPE CloudBank?

A. To easily move workloads to AWS or Azure in the event of site disaster.

B. To improve RPO/RTO objectives by automating snapshot-based integrating between 3PAR and StoreOnce.

C. To regularly send backups to the cloud for the purposes of DR protection.

D. To leverage 3PAR snapshots and utilize StoreOnce recovery capabilities to minimize data loss and downtime.

Which HPE storage solutions offer a two-tier backup solution for hybrid cloud with optimal recovery time? (Choose two.)

A. Simplivity 380

B. Nimble SF series

C. 3PAR 8000 series

D. StoreOnce with Catalyst

E. Nimble CS series

You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICs are included in the configuration. You designed an Intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.

Which statement is correct when discussing the IRF limits for this configuration?

A. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.

B. A maximum of two switches can be used in an IRF stack when connecting storage.

C. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.

D. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.

A customer currently has a CS1000H and wants to upgrade to a CS3000.

What must be considered before upgrading?

A. This upgrade is disruptive and needs planned downtime.

B. A capacity upgrade to a fully populated array has to be performed first.

C. Timeless storage support is not offered for CS1000H entry-level systems.

D. A controller upgrade to a CS1000F has to be performed first.