When performing "A1 the Box" management, what must be done to successfully connect to the Management Module?

A. Configure PuTTY for a serial connection

B. Change the baud rate to 128000

C. Connect cables to the KVM

D. Attach standard A-to-A USB cable to a laptop

An administrator is about to perform a firmware update on an MX9116n switch OS 10 from the CLI. The latest OS 10 switch firmware image has been downloaded and their TFTP server is set up. Upon logged in with administrator credentials on the switch, which command should be used to start the update procedure?

A. firmwaredownload tftp://server-ip/imagename

B. install tftp://server-ip/imagename

C. fwupdate tftp://server-ip/imagename

D. upgrade tftp://server-ip/imagename

Which I/O module is supported for Fabric B?

A. MX5016s

B. MSG610s

C. MX5000s

D. MX5108n

In an MX7000, which components are cooled by the rear fans?

A. Fabric A, B, and C IOMs only

B. All compute and storage sleds

C. Management Modules only

D. Fabric A, B, and C IOMs and the Management Modules

After installing a supported OS from a bootable ISO on an MX740c sled, an administrator discovers that not all the hardware is property detected by the OS. They plan to reinstall the OS. What should the administrator do to resolve this issue through OS installation?

A. Update the Dell OS Driver Pack and use the OS Deployment feature

B. Modify the bootable ISO to remove faulty drivers and boot directly from the bootable ISO

C. Modify the bootable ISO to remove faulty drivers and use the OS deployment feature

D. Update the Dell OS Driver Pack and boot directly from the bootable ISO

What is a function of the Fabric Resources Director (FReD)?

A. SAS Expander routing for Fabric C

B. Hosting OME-M interface

C. Critical temperature monitoring

D. Providing QuickSync 2 feature

Where is a valid storage location for extracting the full MX7000 chassis logs package?

A. VMFS

B. FTP

C. CIFS

D. CSV

The iSM is available under which license(s)?

A. OpenManage Enterprise-Modular

B. iDRAC Express and iDRAC Enterprise

C. iDRAC Enterprise only

D. iDRAC Express only

Where in the OME-M Web interface can the Chassis Deployment Wizard be found?

A. Hardware > Initial Configuration

B. Configuration > Deploy > Chassis Deployment Wizard

C. Home > Settings > Chassis Deployment Wizard

D. Home > Configure > Initial Configuration

Which command(s) is supported in the current PowerEdge MX Redfish implementation?

A. PUT and DELETE

B. PUT only

C. HEAD and PUT

D. GET and DELETE