A technician is creating a virtual disk in the iDRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016 They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard Only the first 2048 GB on the virtual disk can be partitioned

How should the technician obtain access to the remaining 2 TB (approximately) of storage?

A. Use the Lifecycle Controller OS Deployment Wizard to deploy the OS on this server

B. Delete the 4 TB virtual disk and create a virtual (boot) disk no larger than 2048 GB

C. Upgrade to a newer version of the operating system

D. Use F2 to go into the BIOS, change the BIOS boot mode to UEFI, and try again

A technician installs eight servers into a fully operational rack with top of rack switch Each server has a quad 1Gb NIC and redundant power supplies The company uses iDRAC in shared LOM mode with LOM1 as the selected NIC

What should the technician do to verify iDRAC connectivity on each server?

A. iDRAC Datacenter license is installed.

B. Ethernet port LOM1 is cabled and the link light is green.

C. iDRAC dedicated NIC port is cabled and the link light is green

D. iDRAC Enterprise license is installed

Which type of access is known as Firmware RACADM on a Dell EMC PowerEdge server?

A. Accessing RACADM running the Dell Toolkit

B. Accessing RACADM with OpenManage software

C. Logging into iDRAC using SSH or Telnet

D. Logging into iDRAC through Boot Manager

A technician needs to change the iDRAC password on a Dell EMC PowerEdge 14G server in a lights-out datacenter. The be rebooted because it is in production. The iDRAC is configured with the default credentials How could the technician change the iDRAC password?

A. SupportAssist Enterprise

B. iDRAC Web GUI

C. OpenManage Server Administrator

D. Virtual Console; press F2 after rebooting system

An engineer needs to upgrade a Dell EMC PowerEdge R440 server from a single PSU to dual PSU configuration. There are unused PSU modules from PowerEdge R430 and R420 servers available, and they have the same wattage ratings.

What should the engineer do to complete the task?

A. Add the PowerEdge R420 PSU modules to the PowerEdge R440

B. Order a new PSU specific to the existing PowerEdge R440

C. Add the PowerEdge R430 PSU modules to the PowerEdge R440

D. Configure the PowerEdge R440 PSU with 1+1 configuration

What is the minimum number of components, beside the system board, required to POST?

A. PSUs, CPUs, and DIMMs as configured in BIOS

B. 1 PSU, 1 DIMM, and 1 CPU only

C. 1 PSU and 1 CPU only

D. 1 PSU, 1 CPU, 1 DIMM, and PERC SAS controller

A Dell EMC PowerEdge server has been updated with an LCC and iDRAC DUP to the latest firmware when performing a firmware rollback?

A. Both the iDRAC and the LCC can be rolled back

B. The LCC can be rolled back; the iDRAC cannot be rolled back

C. The iDRAC can be rolled back; the LCC cannot be rolled back

D. The iDRAC cannot be rolled back and the LCC cannot be rolled back

What is the drive characteristic of a BOSS M.2 drive in a Dell EMC PowerEdge server?

A. Single-level cell

B. Read Intensive

C. Quad-level cell

D. Write Intensive

Which mobile devices are supported by Quick Sync 2.0 in 14G PowerEdge servers?

A. Android devices only

B. iOS, Android, and Windows Phone devices

C. iOS and Android devices only

D. iOS devices only

How can the ePSA be accessed?

A. iDRAC

B. Lifecycle Controller

C. VMware vSphere plug-in

D. OMSA