On which platforms should the CBRM Client be installed to do EMC Centera backup with Symantec NetBackup?

A. Solaris

B. Windows

C. Windows and AIx

D. Windows and Solaris

The storage-strategy is set to Performance Partial and CPP. All objects written to the EMC Centera are greater than 10 MB in size. The threshold is at the default setting. You notice that single instancing does

not work for these objects. What might be the reason?

A. "M" naming scheme is used by the application

B. Application uses embedded BLOBs

C. Collision avoidance flag is set on the application server

D. Size of the parity slices is smaller than the threshold

You want to implement Enhanced Availability incorporating two physical sites. The active CUA and primary EMC Centera are in site A; the standby CUA and secondary EMC Centera are in site B.

In a properly configured environment, which ports will be open on the network firewall between the two sites?

A. 3218, 3682, 4543, 80, 22

B. 3218, 7227, 23

C. 3218, 7227, 3682, 80, 22

D. 3218, 7227, 3862, 80

In the EMC Centera Console, there is a single domain named Default with one EMC Centera in the domain. The customer wants to rename this Default domain to "ABC."

How can this be done?

A. In the EMC Centera Console, highlight the Default domain name, right-click and select Rename from the menu

B. In the EMC Centera Console, under the edit menu, select Rename from the menu

C. The domain name cannot be renamed

D. Using the EMC Centera CLI, rename the domain Default ABC

Writing a 300 KB file to EMC Centera using CPM creates four objects. How many objects would be created if EMC Centera was in default CPP mode with the default threshold?

A. 6

B. 7

C. 8

D. 9

Which CLI command is used to test email notification?

A. notify

B. set cluster notification

C. test email

D. test notification

A customer implemented CUAs in an EA configuration. They had a power issue on the active CUA. What is required for failover to occur in a CUA EA environment?

A. Active and standby CUAs must be separated by a firewall

B. Failover will occur automatically

C. Operator must initiate failover on the standby CUA

D. Standby CUA must have a higher software version

What must be done to use the IP configuration of the active CUA on the standby CUA in the event of a failure/failover?

A. Nothing. The standby is aware of the active CUA's IP configuration and will use this information once a failover is initiated.

B. Nothing. The standby is aware of the active CUA's IP configuration and will use this information as soon as the active goes offline, prior to failover initiation.

C. Once the active CUA is no longer online and failover has been initiated the standby must be reconfigured using the IP configuration of the active.

D. Once the active CUA is no longer online and failover has not been initiated the standby must be reconfigured using the IP configuration of the active.

A customer has an EMC Centera located on network A and an application server located on network B, with the two networks connected via the Internet. Which feature should be enabled to allow communication from the application server located outside of the local private network?

A. DHCP

B. FQDN

C. ICMP

D. NAT

Click the Exhibit button

How is this configuration supported?

A. Not supported

B. Only supported on Gen4 or later hardware

C. Only supported with an RPQ

D. With CentraStar 3.1 or later