Weekly full backups run for clientA on master1 using a storage unit that belongs to media1. The administrator is required to retain clientA's full backups for a period of four months. When the administrator modifies the Full schedule, four months is missing from the selection list. Where should the administrator add the four-month retention period under Host Properties?

A. Master Servers > master1 > Retention Periods

B. Clients > clientA > Global Attributes

C. Media Servers > media1 > Retention Periods

D. Master Servers > master1 > Global Attributes

An administrator has a backup policy with the following attributes: 5 paths listed in the Backup Selections list 3 clients listed in the Clients list Allow multiple data streams is selected Max Jobs per Client value set to 4 How many jobs go Active when the job is started, excluding parent jobs?

A. 8

B. 9

C. 12

D. 15

Which scenario accurately describes the creation of a full synthetic backup using tape?

A. a single drive can be used for both the read and write of the backup

B. a separate read drive and write drive can be used on the same Media Server

C. a read and write drive can be used on different Media Servers

D. a disk storage unit must be used prior to copying the backup to tape

Backup jobs to an MSDP storage unit of a large EXT3 file system for a Linux client connected via a 1 GbE

network are taking excessive time.

Which two settings should an administrator change to improve the performance of the backups? (Select

two.)

A. enable client-side deduplication

B. enable multiplexing

C. enable Use Change Journal for the client

D. enable Use Accelerator for the policy

E. enable WAN optimization

Which two schedule types are allowed for the NBU-Catalog policy type? (Select two.)

A. Automatic Backup

B. Vault Catalog Backup

C. Full Catalog Backup

D. Full Backup

E. Application Backup

Refer to the exhibit.

Two media servers, sharing a library with 10 tape drives, exist in the NetBackup 7.6.1 environment displayed in the exhibit. Both weekly full and daily differential incremental backups need to run for the clients and each schedule has a different retention period. Because of network topology, some clients back up to Media Server 1 and some back up to Media Server 2. The environment suffers from multiple status 96 failures during the backup window. How can the administrator minimize the number of failures?

A. increase the Media unmount delay

B. configure media multiplexing

C. enable backups to span tape media

D. enable media sharing

An administrator has a scheduled policy that backs up 20 clients, each with multiple mount points and multiple streams enabled. One of the jobs has failed and is in an Incomplete state. How should the administrator verify the incomplete job runs prior to the next scheduled backup?

A. run a manual job for the client

B. resume the job

C. run a manual job for the mount point

D. resume the parent job

A NetBackup Master Server has many backups running each night to an MSDP pool that take a long time to complete. While these backups are running, replication jobs are queued. Which action should the administrator perform to ensure replications can occur without waiting for the backups to complete?

A. increase the replication job priority

B. create a new disk storage unit to be used for replications

C. increase the maximum concurrent jobs for the disk storage unit

D. increase the maximum I/O streams for the disk pool

A NetBackup policy is configured to back up the following paths for a client: D:\stage E:\data E:\home

F:\production

Multistreaming is enabled for the backups, and multiplexing is set to 4. Backup streams are running slowly.

Which step should the administrator consider to improve backup performance?

A. increase the multiplexing level

B. back up only one stream from each physical device on the client

C. disable multistreaming

D. increase the number of data buffers

The Master Server catalog is being recovered to a new server. The administrator receives the message displayed below: Please insert the following media and run the volume configuration wizard or the vmupdate command to update the NetBackup database. Host - train1 MediaID - GBP847 Barcode - GBP847S1 In the Administration Console, barcode GBP847S1 is associated with media ID P847S1. How should the administrator proceed?

A. use bplabel to change the media ID > re-inventory the library > perform recovery

B. use nbdelete to remove the media id > use vmadd to re-add the media id > re-inventory the library > perform recovery

C. delete the tape > set the media ID generation rule accordingly > re-inventory the library > run recovery

D. delete the tape > set the barcode rule accordingly > re-inventory the library > run recovery